Acoustic underlay for Chislehurst flat conversions
Most Chislehurst freeholders write "17dB minimum impact reduction" into the lease and stop there. That single line rules out standard 3mm foam, standard XPS boards and 90% of laminate underlay. In a victorian and edwardian detached homes conversion we fit rubber-crumb or cork-composite underlays rated 18–21dB with a signed spec sheet you can send to the managing agent before work starts.
What acoustic underlay for flat conversions in Chislehurst actually involves
Most Chislehurst freeholders write "17dB minimum impact reduction" into the lease and stop there. That single line rules out standard 3mm foam, standard XPS boards and 90% of laminate underlay. In a victorian and edwardian detached homes conversion we fit rubber-crumb or cork-composite underlays rated 18–21dB with a signed spec sheet you can send to the managing agent before work starts.
Period detached homes often have parquet under the carpet — we lift carefully before quoting.
“Would highly recommend, Jordan is professional and polite and work is carried out to a high standard. Would definitely use him again.” — Kelly King, verified Google review
- Rubber-crumb and cork-composite underlays rated ΔLw 18–21dB
- Meets typical London leasehold requirement (≥17dB impact reduction)
- Signed spec sheet supplied for managing agent / freeholder approval
- Perimeter isolation strip fitted so plank noise doesn't bridge the wall
Three things that decide a lvt fit in Chislehurst
- Subfloor flatness
LVT shows every bump — victorian and edwardian detached homes subfloors in Chislehurst almost always need ply or self-levelling screed first.
- Door undercut
We trim doors on the day so they swing cleanly over glue-down LVT — no scraping, no callbacks.
- Pattern direction
Plank run follows the longest sightline; in narrow Chislehurst hallways that means front-door to kitchen.
Bottom line: if your lease says 17dB, standard foam won't pass. We fit and document the underlay that will in Chislehurst.
Postcodes: BR7 · Routes: the A222 and A20 · Common build: Victorian and Edwardian detached homes.
Covering Chislehurst West, Mottingham border, Petts Wood border.
Relevant finishes for acoustic underlay for flat conversions
Acoustic Underlay for Flat Conversions in Chislehurst — common questions
We provide the underlay's independent test certificate (BS EN ISO 717-2) plus a photo record of the perimeter strip and floor build-up. That's enough for 95% of Chislehurst managing agents; full on-site sound testing is a separate acoustic-consultant job.
A 5–10mm foam strip around the wall edge stops the plank layer touching the wall or skirting. Without it, footfall bridges into the party wall and the downstairs flat still hears it — even with a great underlay. We fit it as standard.
Only by lifting the LVT first. If the LVT is glue-down we usually replace it; if it's click-lock we can lift, add underlay and refit — subject to a condition check on site.
Usually yes on Chislehurst leasehold flats. We supply the underlay spec sheet and product data ahead of the fit so you can get written approval — most agents turn it round in a week.