Fit lease-safe flooring in your Eltham flat
Fitting a new floor in a Eltham leasehold flat isn't just a product choice — it's a compliance exercise. We supply the acoustic underlay data sheet (BS EN ISO 717-2 tested), fit it correctly under LVT or engineered wood, and give you the paperwork trail for the freeholder and your neighbours.
What acoustic underlay for flat conversions in Eltham actually involves
Fitting a new floor in a Eltham leasehold flat isn't just a product choice — it's a compliance exercise. We supply the acoustic underlay data sheet (BS EN ISO 717-2 tested), fit it correctly under LVT or engineered wood, and give you the paperwork trail for the freeholder and your neighbours.
Span estates often have unusual screed levels — we'll moisture-test before quoting LVT.
- Rubber-crumb and cork-composite underlays rated ΔLw 18–21dB
- Meets typical London leasehold requirement (≥17dB impact reduction)
- Signed spec sheet supplied for managing agent / freeholder approval
- Perimeter isolation strip fitted so plank noise doesn't bridge the wall
What we check first on a Eltham lvt job
- Subfloor flatness
LVT shows every bump — edwardian terraces subfloors in Eltham almost always need ply or self-levelling screed first.
- Door undercut
We trim doors on the day so they swing cleanly over glue-down LVT — no scraping, no callbacks.
- Pattern direction
Plank run follows the longest sightline; in narrow Eltham hallways that means front-door to kitchen.
“JT Flooring — Excellent from start to finish! Installed my carpets at my old flat and now at my new property. I have recommended to my neighbours and friends who have used his service! Fast, efficient and always gives a friendly personal service!” — Eric Ng, verified Google review
In short — leasehold-compliant acoustic underlay in Eltham from £12/m² supplied and fitted, with signed spec sheets for the managing agent.
Postcodes: SE9 · Routes: the A2 and South Circular · Common build: Edwardian terraces.
Covering Eltham Park, New Eltham, Mottingham.
Relevant finishes for acoustic underlay for flat conversions
Acoustic Underlay for Flat Conversions in Eltham — common questions
We provide the underlay's independent test certificate (BS EN ISO 717-2) plus a photo record of the perimeter strip and floor build-up. That's enough for 95% of Eltham managing agents; full on-site sound testing is a separate acoustic-consultant job.
A 5–10mm foam strip around the wall edge stops the plank layer touching the wall or skirting. Without it, footfall bridges into the party wall and the downstairs flat still hears it — even with a great underlay. We fit it as standard.
Only by lifting the LVT first. If the LVT is glue-down we usually replace it; if it's click-lock we can lift, add underlay and refit — subject to a condition check on site.
Usually yes on Eltham leasehold flats. We supply the underlay spec sheet and product data ahead of the fit so you can get written approval — most agents turn it round in a week.