Waterproof · Warmer than tile · Slip-rated

Bathroom LVT in Thamesmead

From £50/m² fitted supplied & fitted

Most Thamesmead bathrooms are small enough that LVT goes down in half a day — strip out the old vinyl, level the subfloor, glue and seal. In rental properties around SE28 we cove the edges so water can't get under.

5-star rated locally·25 minutes from our base·From £50/m² fitted supplied & fitted
LVT fitted in a 1970s peabody estates in Thamesmead
Bathroom LVT · Thamesmead

What bathroom lvt in Thamesmead actually involves

Most Thamesmead bathrooms are small enough that LVT goes down in half a day — strip out the old vinyl, level the subfloor, glue and seal. In rental properties around SE28 we cove the edges so water can't get under.

Original 70s screed is often uneven — self-levelling latex is almost always needed for LVT.

Thamesmead lvt — the details that matter

  • Subfloor flatness

    LVT shows every bump — 1970s peabody estates subfloors in Thamesmead almost always need ply or self-levelling screed first.

  • Door undercut

    We trim doors on the day so they swing cleanly over glue-down LVT — no scraping, no callbacks.

  • Pattern direction

    Plank run follows the longest sightline; in narrow Thamesmead hallways that means front-door to kitchen.

Included with every Thamesmead job
  • Glue-down LVT — sealed at every edge
  • Coved up the wall 100mm where required
  • Stone or wood look — Amtico, Karndean, Polyflor
  • Sealed under the toilet pan and bath foot
Summary

In short — bathroom LVT in Thamesmead from £50/m² fitted, sealed at every edge, coved on request.

Verified customer review

“Fantastic & efficient service from the team — quote was back to me really quick, and best value I could find after phoning around and shopping for weeks on end. Highly recommended.” — Sam Lorkins, verified Google review

Thamesmead context

Postcodes: SE28 · Routes: the A2016 (Bronze Age Way) · Common build: 1970s Peabody estates.

Covering Southmere, West Thamesmead, Binsey Walk.

JT Flooring gallery

Relevant finishes for bathroom lvt

Herringbone LVT kitchen in evening light from the JT Flooring project gallery
Herringbone LVT kitchen in evening light — example from the JT Flooring project gallery for Thamesmead customers
LVT planks against navy units from the JT Flooring project gallery
LVT planks against navy units — example from the JT Flooring project gallery for Thamesmead customers
Finished LVT kitchen with skirtings reset from the JT Flooring project gallery
Finished LVT kitchen with skirtings reset — example from the JT Flooring project gallery for Thamesmead customers
Thamesmead FAQs

Bathroom LVT in Thamesmead — common questions

Will it work over existing tiles?

Sometimes — we'd skim and prime first. Often easier and cheaper to lift the tiles and start fresh, depending on the 1970s peabody estates subfloor.

Slip rated?

Most bathroom LVT we fit in Thamesmead is R10/R11 rated — fine when wet without feeling rough underfoot.

What about a coved finish?

On request — popular in Thamesmead rentals and family bathrooms. We cove 100mm up the wall and finish with a capping strip.

Will the LVT seal around the toilet?

Yes — we cut around the pan and seal with bathroom-grade silicone so water can't get underneath.

Call WhatsApp Quote