Screed and prep across SE10/SE3
LVT and laminate telegraph every bump in a subfloor. Older Greenwich slabs and modern floating screeds both need a level base — we self-level with latex to 3mm/m² tolerance before any decorative flooring goes down.
What concrete floor levelling in Greenwich actually involves
LVT and laminate telegraph every bump in a subfloor. Older Greenwich slabs and modern floating screeds both need a level base — we self-level with latex to 3mm/m² tolerance before any decorative flooring goes down.
Period properties have suspended timber and lath ceilings below — no aggressive sanding.
- Latex screed for 3–15mm level changes
- Fibre-reinforced screeds for cracked slabs
- Full moisture testing before pour
- Ready for LVT, laminate, vinyl or wood
Before we quote a subfloor prep job in Greenwich
- Stair nosings
Older Greenwich stairs often have shallow treads — we re-cut grippers rather than force a standard kit.
- Doorway transitions
Most georgian and victorian period homes doorways here need a bevelled bar rather than a Z-bar to clear the carpet next door.
- Underlay choice
8mm crumb is the usual call for Greenwich bedrooms; 10mm PU on stairs to stop bounce.
"Prep-only screed handover — the other fitter said it was the flattest base he'd worked on this year." — SE10/SE3 trade
In short — concrete floor levelling in Greenwich from £18/m², latex screed to 3mm/m² tolerance.
Postcodes: SE10/SE3 · Routes: the A2 and Blackwall Tunnel approach · Common build: Georgian and Victorian period homes.
Covering Greenwich Peninsula, West Greenwich, Maze Hill.
Concrete Floor Levelling jobs we've finished nearby
Concrete Floor Levelling in Greenwich — common questions
Yes — a lot of our screeding is for other fitters and small builders across Greenwich. We hand back a level, dry slab and step out.
Yes — every SE10/SE3 slab gets a hygrometer test before we screed. If moisture is above 75% RH we recommend a DPM before any decorative floor goes down.
Latex screed is walk-on in 3–4 hours, floor-fit ready in 24 hours. Standard timing on every Greenwich Peninsula prep-and-fit we do.
3–15mm typical. Above 15mm we specify fibre-reinforced or a specialist deep-pour screed. Most Greenwich residential slabs are inside the standard range.