Rubber and sprung floors across SE9
Independent gyms across SE9 usually cut cost on flooring and pay it back in equipment damage. We spec commercial-grade rubber and sprung vinyl to genuinely last a five-year lease.
What gym & studio flooring in New Eltham actually involves
Independent gyms across SE9 usually cut cost on flooring and pay it back in equipment damage. We spec commercial-grade rubber and sprung vinyl to genuinely last a five-year lease.
Original pine boards over joists — same story as neighbouring Sidcup, so ply overlay before LVT is the norm.
Three things that decide a vinyl fit in New Eltham
- Sheet seams
Sheet vinyl in a typical New Eltham kitchen is usually a single drop — no seam, no water-ingress risk.
- Subfloor
On older 1930s bay-fronted semis we overlay with ply before laying vinyl so the boards underneath don't telegraph through.
- Coving
For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.
- Heavy-duty rubber tile and roll for weight zones
- Sprung sports vinyl for studios
- Shock-absorbing underlay so upstairs neighbours don't complain
- Zoned by discipline — weights, cardio, studio, changing
Bottom line: the deadlift platform is a different floor to the studio. Spec each right.
“Jordan was so helpful and fit in to our dates. Even though we didn't know what they would be. Nothing was too much trouble. Will definitely recommend to anyone. Thank you.” — Georgina Bozza, verified Google review
Postcodes: SE9 · Routes: the A20 · Common build: 1930s bay-fronted semis.
Covering Avery Hill, Southwood, Green Lane.
Relevant finishes for gym & studio flooring



Gym & Studio Flooring in New Eltham — common questions
R11 safety vinyl with coved skirting. Same spec we use for SE9 restaurant kitchens — waterproof and slip-safe.
Yes — most New Eltham gyms we refit stay open. We work in zones, moving equipment as we go.
With 18mm acoustic underlay under sprung vinyl, yes — measured impact noise drops around 25dB. Standard on Avery Hill PT studios in 1930s bay-fronted semiss.
Minimum 15mm rubber tile, ideally 20mm on a lifting platform. Below that, plates crack the sub-floor over time. Standard spec on every New Eltham gym fit we do.
