New builds · Handovers · Shared-ownership

New build flooring in Barnehurst

From £35/m² supplied & fitted supplied & fitted

If your new build in DA7 has underfloor heating we only spec LVT with the correct tog rating — anything else voids the UFH warranty. We'll confirm the range on the quote.

5-star rated locally·12 minutes from our base·From £35/m² supplied & fitted supplied & fitted
Close-up of fitted lvt in Barnehurst
New Build Flooring · Barnehurst

What new build flooring in Barnehurst actually involves

If your new build in DA7 has underfloor heating we only spec LVT with the correct tog rating — anything else voids the UFH warranty. We'll confirm the range on the quote.

1930s pine floorboards throughout — always ply-overlaid before LVT or vinyl.

Three things that decide a lvt fit in Barnehurst

  • Subfloor flatness

    LVT shows every bump — 1930s bay-fronted semis subfloors in Barnehurst almost always need ply or self-levelling screed first.

  • Door undercut

    We trim doors on the day so they swing cleanly over glue-down LVT — no scraping, no callbacks.

  • Pattern direction

    Plank run follows the longest sightline; in narrow Barnehurst hallways that means front-door to kitchen.

Included with every Barnehurst job
  • Fit around developer handover snags — we'll wait for keys
  • Underfloor-heating-compatible LVT ranges recommended
  • Screed on new slabs where the developer's finish is uneven
  • Warranty-safe methods for shared-ownership properties
Summary

Bottom line: upgrade the Barnehurst developer floor before the furniture arrives — much less hassle.

Verified customer review

“Jordan was very professional in his approach and work, cannot fault anything.” — Karen Hosking, verified Google review

Barnehurst context

Postcodes: DA7 · Routes: the A2 and Mayplace Road · Common build: 1930s bay-fronted semis.

Covering Mayplace, Colyers, May Place.

JT Flooring gallery

Relevant finishes for new build flooring

Herringbone LVT mid-install in a kitchen from the JT Flooring project gallery
Herringbone LVT mid-install in a kitchen — example from the JT Flooring project gallery for Barnehurst customers
Herringbone LVT kitchen in evening light from the JT Flooring project gallery
Herringbone LVT kitchen in evening light — example from the JT Flooring project gallery for Barnehurst customers
Herringbone LVT through a bay-window reception from the JT Flooring project gallery
Herringbone LVT through a bay-window reception — example from the JT Flooring project gallery for Barnehurst customers
Barnehurst FAQs

New Build Flooring in Barnehurst — common questions

Can we fit before we move into our Barnehurst new build?

Yes — best time. We can go in the day after handover, finish before removals, and the floor gets no scuff marks.

Does new build screed need to dry first?

Often yes. We use a calcium carbide meter on the visit — if it's over 2% CM we'll recommend waiting or applying a moisture barrier.

Is LVT safe over UFH in a Barnehurst new build?

Only the ranges rated for it — max 27°C surface, tog ≤1.5. We only quote UFH-approved LVT for these homes.

Can we fit before the kitchen goes in?

We'd advise fitting kitchen last on LVT — that way you can pull the fridge/oven without lifting planks in the future.

Call WhatsApp Quote