Coved safety flooring for Gravesend kitchens
Coving in a prep kitchen is a non-negotiable for Gravesend environmental health. We hot-weld the seams and cove 100mm up the wall so there's no dirt trap. Passes first inspection every time.
What restaurant & café flooring in Gravesend actually involves
Coving in a prep kitchen is a non-negotiable for Gravesend environmental health. We hot-weld the seams and cove 100mm up the wall so there's no dirt trap. Passes first inspection every time.
Ebbsfleet new-builds come LVT-ready; older terraces almost always need ply over the floorboards.
What we check first on a Gravesend vinyl job
- Sheet seams
Sheet vinyl in a typical Gravesend kitchen is usually a single drop — no seam, no water-ingress risk.
- Subfloor
On older victorian terraces we overlay with ply before laying vinyl so the boards underneath don't telegraph through.
- Coving
For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.
- R10/R11-rated safety flooring for kitchens
- Welded seams and coved skirting for HACCP compliance
- Front-of-house LVT that survives spills and chair scrapes
- Overnight fits so the restaurant opens as normal
In short — restaurant flooring in Gravesend from £32/m² fitted, kitchen and FOH in one overnight visit.
"Coved safety vinyl in the prep zone, LVT in the dining room, done overnight." — DA11/DA12 café owner
Postcodes: DA11/DA12 · Routes: the A2 and M2 · Common build: Victorian terraces.
Covering Ebbsfleet, Northfleet, Singlewell.
Restaurant & Café Flooring jobs we've finished nearby



Restaurant & Café Flooring in Gravesend — common questions
Yes — hundreds of LVT designs from Karndean, Amtico and Polyflor. We match to your Gravesend brand and lighting on the visit.
A 100m² restaurant — kitchen safety plus dining LVT — is a Sunday night to Monday morning job. You lose one trading service.
R10 for dry-side prep, R11 for wet zones (pot wash, dish-out, walk-in fridge). Most Gravesend kitchens end up with both, split by zone.
Yes — environmental health inspectors in DA11/DA12 will fail a kitchen without coving. We cove 100mm up the wall as standard on every commercial kitchen fit.
