Crayford R11 safety vinyl — coved, welded, waterproof
Disabled bathrooms in Barnes Cray rentals and social housing need a compliant fit — R11 slip rating, coved up the wall, welded so there's no dirt trap. Standard spec on every social housing wet room we do.
What safety flooring for wet rooms in Crayford actually involves
Disabled bathrooms in Barnes Cray rentals and social housing need a compliant fit — R11 slip rating, coved up the wall, welded so there's no dirt trap. Standard spec on every social housing wet room we do.
Converted industrial flats often have polished concrete — checked for moisture before LVT.
- R11 slip-rated safety vinyl
- 100mm coving up the wall with capping seal
- Hot-welded seams, no dirt trap
- Suitable for wet rooms, disabled bathrooms and shower areas
Before we quote a vinyl job in Crayford
- Sheet seams
Sheet vinyl in a typical Crayford kitchen is usually a single drop — no seam, no water-ingress risk.
- Subfloor
On older 1930s semis we overlay with ply before laying vinyl so the boards underneath don't telegraph through.
- Coving
For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.
"Private shower room refit — no silicone, no fail points." — DA1 homeowner
Bottom line: a wet room needs a full seal — cove up the wall, weld the seams, nothing else works long-term.
Postcodes: DA1 · Routes: the A206 and Bluewater link road · Common build: 1930s semis.
Covering Barnes Cray, Slade Green border, Crayford town.
Safety Flooring for Wet Rooms jobs we've finished nearby
Safety Flooring for Wet Rooms in Crayford — common questions
A welded safety vinyl fit lasts 15+ years in a domestic wet room. Silicone corner beads fail; welded seams don't.
Sometimes — depends on tile flatness and drainage. We assess on the visit; a self-levelling screed sometimes needed on older DA1 bathrooms.
R11 — the extra grip matters when the floor is wet and soapy. R10 is fine for hallway zones outside the shower. We spec by zone on the Barnes Cray visit.
Yes — coving up the wall stops water reaching the wall/floor joint. Without it, silicone fails inside 2 years and you're looking at a re-fit. Standard spec on every wet room we do.