Lee R11 safety vinyl — coved, welded, waterproof
A Lee wet room floor has to do three things — grip when wet, not leak, and stay hygienic. R11 safety vinyl with 100mm coving and welded seams delivers all three; anything less is a leak waiting to happen.
What safety flooring for wet rooms in Lee actually involves
A Lee wet room floor has to do three things — grip when wet, not leak, and stay hygienic. R11 safety vinyl with 100mm coving and welded seams delivers all three; anything less is a leak waiting to happen.
Victorian terraces often have suspended timber over ventilated voids — careful nailing only.
Before we quote a vinyl job in Lee
- Lee subfloor reality
Victorian terraces often have suspended timber over ventilated voids — careful nailing only.
- Coving
For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.
- Subfloor
On older victorian terraces we overlay with ply before laying vinyl so the boards underneath don't telegraph through.
- R11 slip-rated safety vinyl
- 100mm coving up the wall with capping seal
- Hot-welded seams, no dirt trap
- Suitable for wet rooms, disabled bathrooms and shower areas
Recap — R11 safety vinyl across SE12/SE13, fitted for private and social housing wet rooms.
“Responsiveness, Punctuality, Quality, Professionalism, Value — all 5 stars.” — Visu Nagella, verified Google review
Postcodes: SE12/SE13 · Routes: the South Circular (A205) · Common build: Victorian terraces.
Covering Manor Park, Old Road, Burnt Ash Hill.
Relevant finishes for safety flooring for wet rooms
Safety Flooring for Wet Rooms in Lee — common questions
Yes — coving up the wall stops water reaching the wall/floor joint. Without it, silicone fails inside 2 years and you're looking at a re-fit. Standard spec on every wet room we do.
R11 — the extra grip matters when the floor is wet and soapy. R10 is fine for hallway zones outside the shower. We spec by zone on the Manor Park visit.
Sometimes — depends on tile flatness and drainage. We assess on the visit; a self-levelling screed sometimes needed on older SE12/SE13 bathrooms.
A welded safety vinyl fit lasts 15+ years in a domestic wet room. Silicone corner beads fail; welded seams don't.