R11 · Coved · Welded seams

Plumstead R11 safety vinyl — coved, welded, waterproof

From £36/m² fitted supplied & fitted

Private wet rooms and shower zones in SE18 homes work the same way — we cove up the wall and hot-weld the seams whether it's a rental compliance job or a private ensuite.

5-star rated locally·25 minutes from our base·From £36/m² fitted supplied & fitted
Vinyl fitted in a victorian and edwardian terraces in Plumstead
Safety Flooring for Wet Rooms · Plumstead

What safety flooring for wet rooms in Plumstead actually involves

Private wet rooms and shower zones in SE18 homes work the same way — we cove up the wall and hot-weld the seams whether it's a rental compliance job or a private ensuite.

Original pine boards on the terraces — ply overlay before LVT is standard.

Plumstead vinyl — the details that matter

  • Sheet seams

    Sheet vinyl in a typical Plumstead kitchen is usually a single drop — no seam, no water-ingress risk.

  • Subfloor

    On older victorian and edwardian terraces we overlay with ply before laying vinyl so the boards underneath don't telegraph through.

  • Coving

    For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.

Included with every Plumstead job
  • R11 slip-rated safety vinyl
  • 100mm coving up the wall with capping seal
  • Hot-welded seams, no dirt trap
  • Suitable for wet rooms, disabled bathrooms and shower areas
Summary

In short — wet room safety flooring in Plumstead from £36/m² fitted, R11 coved and welded.

Verified customer review

“Jordan is polite and amiable. He gets on with his work without a fuss — truly professional approach from start to finish. Shall definitely use again in the future.” — Kell Ward, verified Google review

Plumstead context

Postcodes: SE18 · Routes: the A206 · Common build: Victorian and Edwardian terraces.

Covering Plumstead Common, The Slade, Winn's Common.

JT Flooring gallery

Relevant finishes for safety flooring for wet rooms

Twist-pile carpet fitted into a period reception room from the JT Flooring project gallery
Twist-pile carpet fitted into a period reception room — example from the JT Flooring project gallery for Plumstead customers
Fitted stair runner with neat tucked edges from the JT Flooring project gallery
Fitted stair runner with neat tucked edges — example from the JT Flooring project gallery for Plumstead customers
Pale runner on a stained timber staircase from the JT Flooring project gallery
Pale runner on a stained timber staircase — example from the JT Flooring project gallery for Plumstead customers
Plumstead FAQs

Safety Flooring for Wet Rooms in Plumstead — common questions

Do I need coving in a Plumstead wet room?

Yes — coving up the wall stops water reaching the wall/floor joint. Without it, silicone fails inside 2 years and you're looking at a re-fit. Standard spec on every wet room we do.

R10 or R11 for a shower zone?

R11 — the extra grip matters when the floor is wet and soapy. R10 is fine for hallway zones outside the shower. We spec by zone on the Plumstead Common visit.

Can you fit over the existing tile floor?

Sometimes — depends on tile flatness and drainage. We assess on the visit; a self-levelling screed sometimes needed on older SE18 bathrooms.

How long does the seal last?

A welded safety vinyl fit lasts 15+ years in a domestic wet room. Silicone corner beads fail; welded seams don't.

Call WhatsApp Quote