R11 · Coved · Welded seams

Wet room safety flooring in Sidcup

From £36/m² fitted supplied & fitted

A Sidcup wet room floor has to do three things — grip when wet, not leak, and stay hygienic. R11 safety vinyl with 100mm coving and welded seams delivers all three; anything less is a leak waiting to happen.

5-star rated locally·5–10 minutes from our base·From £36/m² fitted supplied & fitted
Close-up of fitted vinyl in Sidcup
Safety Flooring for Wet Rooms · Sidcup

What safety flooring for wet rooms in Sidcup actually involves

A Sidcup wet room floor has to do three things — grip when wet, not leak, and stay hygienic. R11 safety vinyl with 100mm coving and welded seams delivers all three; anything less is a leak waiting to happen.

1930s pine boards over joists — usually need a 6mm ply overlay before LVT or vinyl.

Three things that decide a vinyl fit in Sidcup

  • Sheet seams

    Sheet vinyl in a typical Sidcup kitchen is usually a single drop — no seam, no water-ingress risk.

  • Subfloor

    On older 1930s bay-fronted semis we overlay with ply before laying vinyl so the boards underneath don't telegraph through.

  • Coving

    For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.

Included with every Sidcup job
  • R11 slip-rated safety vinyl
  • 100mm coving up the wall with capping seal
  • Hot-welded seams, no dirt trap
  • Suitable for wet rooms, disabled bathrooms and shower areas
Summary

In short — wet room safety flooring in Sidcup from £36/m² fitted, R11 coved and welded.

Verified customer review

“Lovely carpet fitted by Jordan, really good service, definitely will be using again.” — Louise Bowyer, verified Google review

Sidcup context

Postcodes: DA14/DA15 · Routes: the A20 · Common build: 1930s bay-fronted semis.

Covering Sidcup Hill, Halfway Street, New Eltham border.

JT Flooring gallery

Relevant finishes for safety flooring for wet rooms

Tile-effect vinyl fitted around a bathroom suite from the JT Flooring project gallery
Tile-effect vinyl fitted around a bathroom suite — example from the JT Flooring project gallery for Sidcup customers
Marble-effect floor in a contemporary bathroom from the JT Flooring project gallery
Marble-effect floor in a contemporary bathroom — example from the JT Flooring project gallery for Sidcup customers
Laminate flooring in a bedroom feature space from the JT Flooring project gallery
Laminate flooring in a bedroom feature space — example from the JT Flooring project gallery for Sidcup customers
Sidcup FAQs

Safety Flooring for Wet Rooms in Sidcup — common questions

Do I need coving in a Sidcup wet room?

Yes — coving up the wall stops water reaching the wall/floor joint. Without it, silicone fails inside 2 years and you're looking at a re-fit. Standard spec on every wet room we do.

R10 or R11 for a shower zone?

R11 — the extra grip matters when the floor is wet and soapy. R10 is fine for hallway zones outside the shower. We spec by zone on the Sidcup Hill visit.

Can you fit over the existing tile floor?

Sometimes — depends on tile flatness and drainage. We assess on the visit; a self-levelling screed sometimes needed on older DA14/DA15 bathrooms.

How long does the seal last?

A welded safety vinyl fit lasts 15+ years in a domestic wet room. Silicone corner beads fail; welded seams don't.

Call WhatsApp Quote