Self-levelling screed in Erith
If you've had a quote that skips the screed, ask why. In Erith victorian and post-war terraces the subfloor is rarely flat enough to lay LVT directly — we always check at the visit.
What self-levelling screed in Erith actually involves
If you've had a quote that skips the screed, ask why. In Erith victorian and post-war terraces the subfloor is rarely flat enough to lay LVT directly — we always check at the visit.
Riverside flats sometimes flag damp — we use a meter before guaranteeing any glue-down vinyl.
"Kitchen screeded in the morning, LVT down the next day — no hold-ups." — Erith customer
- Latex-based self-levelling screed for LVT and vinyl
- Most kitchens and hallways screeded in half a day
- Walkable in 4–6 hours, fittable next morning
- Old adhesive and tile removed first
Three things that decide a subfloor prep fit in Erith
- Erith subfloor reality
Riverside flats sometimes flag damp — we use a meter before guaranteeing any glue-down vinyl.
- Underlay choice
8mm crumb is the usual call for Erith bedrooms; 10mm PU on stairs to stop bounce.
- Doorway transitions
Most victorian and post-war terraces doorways here need a bevelled bar rather than a Z-bar to clear the carpet next door.
In short — self-levelling screed in Erith from £15/m² applied, walkable in hours, LVT-ready next day.
Postcodes: DA8 · Routes: the A206 along the river · Common build: Victorian and post-war terraces.
Covering Northumberland Heath, Slade Green, Belvedere border.
Self-Levelling Screed jobs we've finished nearby
Self-Levelling Screed in Erith — common questions
Most victorian and post-war terraces kitchens and hallways do. We confirm at the visit — sometimes a plywood overlay is the better call instead.
4–6 hours typically. LVT can usually be laid the next morning.
Sometimes — we'd need to prime them with a specific bond primer first. Often easier to lift tiles and screed the bare subfloor.
Latex sets in hours and pours flat; sand-cement takes days and needs tamping. For LVT in Erith we almost always use latex.