Runners fitted to your Orpington staircase
Runners look simple. They aren't. On the Victorian and Edwardian houses common around 1930s semis, Petts Wood detached homes, newer flats around Orpington station, treads aren't square, risers vary by 3–4mm, and the string tapers. A machine-cut runner laid straight looks wrong within three steps. We template each stair by hand before we cut.
What stair runner fitting in Orpington actually involves
Runners look simple. They aren't. On the Victorian and Edwardian houses common around 1930s semis, Petts Wood detached homes, newer flats around Orpington station, treads aren't square, risers vary by 3–4mm, and the string tapers. A machine-cut runner laid straight looks wrong within three steps. We template each stair by hand before we cut.
Petts Wood detached homes often have decorative parquet — sometimes worth restoring instead.
"Runner on Victorian stairs in Petts Wood — reveal is dead even top to bottom. Rods finished it off." — Orpington customer
- Bare timber stripped, sanded and finished each side of the runner
- Wool-rich stripe or plain runners — 60cm to 90cm widths
- Optional brass or antique stair rods, spring-loaded or screw-fit
- Waterfall or cap-and-band fit — you choose the tread finish
What we check first on a Orpington carpet job
- Stair nosings
Older Orpington stairs often have shallow treads — we re-cut grippers rather than force a standard kit.
- Doorway transitions
Most 1930s semis doorways here need a bevelled bar rather than a Z-bar to clear the carpet next door.
- Underlay choice
8mm crumb is the usual call for Orpington bedrooms; 10mm PU on stairs to stop bounce.
In short — hand-templated stair runners across Orpington from £28 per stair fitted, with rods, wool blends and stripe options at survey.
Postcodes: BR5/BR6 · Routes: the A21 corridor · Common build: 1930s semis.
Covering Petts Wood, Green Street Green, St Mary Cray.
Stair Runner Fitting jobs we've finished nearby
Stair Runner Fitting in Orpington — common questions
Most 1930s semis stairs are 85–90cm wide, so a 70cm runner leaves a 7–10cm reveal each side. We measure your treads before recommending — narrower stairs (older 1930s semis, Petts Wood detached homes, newer flats around Orpington station houses) often suit 60cm.
No — we can strip and sand as part of the job. If you've already done it, we check the finish and touch up any patches the runner won't cover before we start.
Mostly, yes. Modern runners are gripper-fitted and don't need rods to hold them. If you want the classic look — brass, pewter or antique — we fit spring-loaded or screw-in rods at the base of each riser.
Yes — we can run the same product up the stairs and across the landing, or a coordinated stripe on the runner with a plain landing. Common request on Green Street Green conversions.