UFH · Wet & electric mats · Low-tog underlay

Flooring over underfloor heating in Bromley

From £38/m² fitted supplied & fitted

Wet UFH in a bickley detached homes extension near the A21 and A222 and electric mats in a Bickley bathroom are different jobs. We spec each — plank type, adhesive, underlay — from the manifold spec you already have. Nothing voids your UFH warranty.

5-star rated locally·20 minutes from our base·From £38/m² fitted supplied & fitted
Recent lvt installation in Bromley (BR1/BR2)
Flooring Over Underfloor Heating · Bromley

What flooring over underfloor heating in Bromley actually involves

Wet UFH in a bickley detached homes extension near the A21 and A222 and electric mats in a Bickley bathroom are different jobs. We spec each — plank type, adhesive, underlay — from the manifold spec you already have. Nothing voids your UFH warranty.

Bickley homes often have deep voids under timber boards — extra noggins before LVT.

Before we quote a lvt job in Bromley

  • Bromley subfloor reality

    Bickley homes often have deep voids under timber boards — extra noggins before LVT.

  • Pattern direction

    Plank run follows the longest sightline; in narrow Bromley hallways that means front-door to kitchen.

  • Door undercut

    We trim doors on the day so they swing cleanly over glue-down LVT — no scraping, no callbacks.

Included with every Bromley job
  • Only UFH-rated LVT, laminate and engineered wood used
  • Underlay kept below 1.0 tog so heat actually reaches the room
  • Perimeter expansion gap sized for full UFH cycle
  • Manifold and probes protected during fit
Summary

Bottom line: a UFH floor is only as good as the plank and underlay above it. We spec both for your Bromley system.

Verified customer review

“Jordan was so helpful and fit in to our dates. Even though we didn't know what they would be. Nothing was too much trouble. Will definitely recommend to anyone. Thank you.” — Georgina Bozza, verified Google review

Bromley context

Postcodes: BR1/BR2 · Routes: the A21 and A222 · Common build: Bickley detached homes.

Covering Bickley, Shortlands, Plaistow.

JT Flooring gallery

Relevant finishes for flooring over underfloor heating

LVT plank fit across a kitchen floor from the JT Flooring project gallery
LVT plank fit across a kitchen floor — example from the JT Flooring project gallery for Bromley customers
Finished LVT kitchen with skirtings reset from the JT Flooring project gallery
Finished LVT kitchen with skirtings reset — example from the JT Flooring project gallery for Bromley customers
LVT planks against navy units from the JT Flooring project gallery
LVT planks against navy units — example from the JT Flooring project gallery for Bromley customers
Bromley FAQs

Flooring Over Underfloor Heating in Bromley — common questions

Do I need to turn UFH off before you fit?

Yes — dropped to 15–18°C for 48 hours before, off during the fit, then ramped back up 2°C per day. We give you the schedule in writing after the Bromley survey.

What's the max floor surface temperature?

55°C at the plank, 27°C at the floor surface — the industry standard. Above that, planks cup and joints open. We commission with your plumber so we know the ramp-up.

Is LVT better than laminate for UFH?

For heat transfer, yes — 4–5mm LVT sits directly on the screed with a very low thermal resistance. Most new Bromley kitchens over UFH now go LVT for that reason.

Can I put laminate over UFH in Bromley?

Yes — but only UFH-rated boards (usually 8mm HDF core, marked on the pack) with an underlay under 1.0 tog. Standard 12mm click laminate will insulate your UFH and cost you heat.

Call WhatsApp Quote