Period property flooring across Lee
Stair runners suit period Lee homes best — carpet down the centre, stained sides showing at the edges, brass rods or invisible clips at each riser. We do this a lot around SE12/SE13.
What victorian property flooring in Lee actually involves
Stair runners suit period Lee homes best — carpet down the centre, stained sides showing at the edges, brass rods or invisible clips at each riser. We do this a lot around SE12/SE13.
Victorian terraces often have suspended timber over ventilated voids — careful nailing only.
- Original floorboards protected, screwed down where squeaky
- 6mm ply overlay before LVT so plank joins don't telegraph
- Stripe runners and brass rods on Victorian stair flights
- Sympathetic transitions where flooring meets tiled hallways
Before we quote a lvt job in Lee
- Subfloor flatness
LVT shows every bump — victorian terraces subfloors in Lee almost always need ply or self-levelling screed first.
- Door undercut
We trim doors on the day so they swing cleanly over glue-down LVT — no scraping, no callbacks.
- Pattern direction
Plank run follows the longest sightline; in narrow Lee hallways that means front-door to kitchen.
"Victorian terrace in Manor Park — stair runner with brass rods, and the original boards are still there underneath." — Lee customer
Bottom line: an older Lee home deserves a fitter who understands originality — that's how we quote them.
Postcodes: SE12/SE13 · Routes: the South Circular (A205) · Common build: Victorian terraces.
Covering Manor Park, Old Road, Burnt Ash Hill.
Victorian Property Flooring jobs we've finished nearby
Victorian Property Flooring in Lee — common questions
Ply overlay (6mm marine ply, screwed) hides most subfloor variation. If a joist is failing we'll flag it — we don't hide structural issues under a new floor.
Regularly. Standard is a 27" wool runner with brass rods; we also do fully bound edges if you want a bolder line.
Yes — we cut a bespoke oak or brass threshold to sit flush with the tile edge. It looks intentional, not patched.
No — we screw squeaky boards, we don't remove them. If you ever want to expose them again, everything we lay comes back up without harming the pine.