Bathroom vinyl across Thamesmead SE28
Most Thamesmead bathrooms are small enough that the whole floor is a single drop of sheet vinyl — no seam means no chance of water getting underneath.
What bathroom vinyl in Thamesmead actually involves
Most Thamesmead bathrooms are small enough that the whole floor is a single drop of sheet vinyl — no seam means no chance of water getting underneath.
Original 70s screed is often uneven — self-levelling latex is almost always needed for LVT.
- Single-drop sheet vinyl — no seam in a standard bathroom
- Coved 100mm up the wall on request
- Cushioned, slip-rated and warm underfoot
- Sealed around toilet pan and bath foot
Thamesmead vinyl — the details that matter
- Sheet seams
Sheet vinyl in a typical Thamesmead kitchen is usually a single drop — no seam, no water-ingress risk.
- Subfloor
On older 1970s peabody estates we overlay with ply before laying vinyl so the boards underneath don't telegraph through.
- Coving
For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.
"Replaced the old vinyl in our rental bathroom in 3 hours — fresh, sealed, ready for the new tenant." — Thamesmead landlord
In short — bathroom vinyl in Thamesmead from £28/m² fitted, single-drop, sealed at every edge.
Postcodes: SE28 · Routes: the A2016 (Bronze Age Way) · Common build: 1970s Peabody estates.
Covering Southmere, West Thamesmead, Binsey Walk.
Bathroom Vinyl jobs we've finished nearby
Bathroom Vinyl in Thamesmead — common questions
Sheet vinyl is cheaper and seamless; LVT is more premium and warmer. Both are waterproof. Rentals and kids' bathrooms usually get vinyl; refits and master bathrooms get LVT.
Yes — on request. Standard in Thamesmead rentals and family bathrooms, 100mm up with a capping strip.
Half a day usually. We lift the old floor, prep, fit and seal the same morning.
Yes — cut tight and sealed with bathroom silicone. Standard in Thamesmead.