Screed and prep across DA14/DA15
Prep-only levelling for other fitters and builders across DA14/DA15 — we screed, moisture-test and hand back a level, dry slab ready for whatever floor they're laying.
What concrete floor levelling in Sidcup actually involves
Prep-only levelling for other fitters and builders across DA14/DA15 — we screed, moisture-test and hand back a level, dry slab ready for whatever floor they're laying.
1930s pine boards over joists — usually need a 6mm ply overlay before LVT or vinyl.
- Latex screed for 3–15mm level changes
- Fibre-reinforced screeds for cracked slabs
- Full moisture testing before pour
- Ready for LVT, laminate, vinyl or wood
Three things that decide a subfloor prep fit in Sidcup
- Sidcup subfloor reality
1930s pine boards over joists — usually need a 6mm ply overlay before LVT or vinyl.
- Underlay choice
8mm crumb is the usual call for Sidcup bedrooms; 10mm PU on stairs to stop bounce.
- Doorway transitions
Most 1930s bay-fronted semis doorways here need a bevelled bar rather than a Z-bar to clear the carpet next door.
“Punctuality, Quality, Value — recommended.” — Falgun, verified Google review
In short — concrete floor levelling in Sidcup from £18/m², latex screed to 3mm/m² tolerance.
Postcodes: DA14/DA15 · Routes: the A20 · Common build: 1930s bay-fronted semis.
Covering Sidcup Hill, Halfway Street, New Eltham border.
Relevant finishes for concrete floor levelling
Concrete Floor Levelling in Sidcup — common questions
Yes — a lot of our screeding is for other fitters and small builders across Sidcup. We hand back a level, dry slab and step out.
Yes — every DA14/DA15 slab gets a hygrometer test before we screed. If moisture is above 75% RH we recommend a DPM before any decorative floor goes down.
Latex screed is walk-on in 3–4 hours, floor-fit ready in 24 hours. Standard timing on every Sidcup Hill prep-and-fit we do.
3–15mm typical. Above 15mm we specify fibre-reinforced or a specialist deep-pour screed. Most Sidcup residential slabs are inside the standard range.