Barnehurst R11 safety vinyl — coved, welded, waterproof
Private wet rooms and shower zones in DA7 homes work the same way — we cove up the wall and hot-weld the seams whether it's a rental compliance job or a private ensuite.
What safety flooring for wet rooms in Barnehurst actually involves
Private wet rooms and shower zones in DA7 homes work the same way — we cove up the wall and hot-weld the seams whether it's a rental compliance job or a private ensuite.
1930s pine floorboards throughout — always ply-overlaid before LVT or vinyl.
“Jordan put in carpets for our 2 bedrooms, landing and stairs in our new loft conversion and in 2 existing bedrooms. The quality of the carpets is excellent and the price for the work very reasonable. He gets on with the job, very professional, work of the highest standard. Top class.” — Gary Simmons, verified Google review
- R11 slip-rated safety vinyl
- 100mm coving up the wall with capping seal
- Hot-welded seams, no dirt trap
- Suitable for wet rooms, disabled bathrooms and shower areas
Before we quote a vinyl job in Barnehurst
- Sheet seams
Sheet vinyl in a typical Barnehurst kitchen is usually a single drop — no seam, no water-ingress risk.
- Subfloor
On older 1930s bay-fronted semis we overlay with ply before laying vinyl so the boards underneath don't telegraph through.
- Coving
For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.
Bottom line: a wet room needs a full seal — cove up the wall, weld the seams, nothing else works long-term.
Postcodes: DA7 · Routes: the A2 and Mayplace Road · Common build: 1930s bay-fronted semis.
Covering Mayplace, Colyers, May Place.
Relevant finishes for safety flooring for wet rooms
Safety Flooring for Wet Rooms in Barnehurst — common questions
A welded safety vinyl fit lasts 15+ years in a domestic wet room. Silicone corner beads fail; welded seams don't.
Sometimes — depends on tile flatness and drainage. We assess on the visit; a self-levelling screed sometimes needed on older DA7 bathrooms.
R11 — the extra grip matters when the floor is wet and soapy. R10 is fine for hallway zones outside the shower. We spec by zone on the Mayplace visit.
Yes — coving up the wall stops water reaching the wall/floor joint. Without it, silicone fails inside 2 years and you're looking at a re-fit. Standard spec on every wet room we do.