Wet room and shower flooring across BR2
Private wet rooms and shower zones in BR2 homes work the same way — we cove up the wall and hot-weld the seams whether it's a rental compliance job or a private ensuite.
What safety flooring for wet rooms in Hayes actually involves
Private wet rooms and shower zones in BR2 homes work the same way — we cove up the wall and hot-weld the seams whether it's a rental compliance job or a private ensuite.
1930s pine boards throughout — ply overlay standard before LVT.
- R11 slip-rated safety vinyl
- 100mm coving up the wall with capping seal
- Hot-welded seams, no dirt trap
- Suitable for wet rooms, disabled bathrooms and shower areas
Before we quote a vinyl job in Hayes
- Hayes subfloor reality
1930s pine boards throughout — ply overlay standard before LVT.
- Coving
For bathrooms we can cove the vinyl up the wall 100mm to seal the floor properly.
- Subfloor
On older 1930s detached homes we overlay with ply before laying vinyl so the boards underneath don't telegraph through.
"Private shower room refit — no silicone, no fail points." — BR2 homeowner
In short — wet room safety flooring in Hayes from £36/m² fitted, R11 coved and welded.
Postcodes: BR2 · Routes: the A232 and Pickhurst Lane · Common build: 1930s detached homes.
Covering Pickhurst, Hayes Common, Keston border.
Safety Flooring for Wet Rooms jobs we've finished nearby
Safety Flooring for Wet Rooms in Hayes — common questions
Yes — coving up the wall stops water reaching the wall/floor joint. Without it, silicone fails inside 2 years and you're looking at a re-fit. Standard spec on every wet room we do.
R11 — the extra grip matters when the floor is wet and soapy. R10 is fine for hallway zones outside the shower. We spec by zone on the Pickhurst visit.
Sometimes — depends on tile flatness and drainage. We assess on the visit; a self-levelling screed sometimes needed on older BR2 bathrooms.
A welded safety vinyl fit lasts 15+ years in a domestic wet room. Silicone corner beads fail; welded seams don't.