Period property flooring across New Eltham
Period properties in New Eltham — the Victorian and Edwardian terraces around 1930s bay-fronted semis with a scattering of post-war infill — need a different approach. Original pine floorboards, uneven joists, decorative tile hallways at the front door. We work around all of it.
What victorian property flooring in New Eltham actually involves
Period properties in New Eltham — the Victorian and Edwardian terraces around 1930s bay-fronted semis with a scattering of post-war infill — need a different approach. Original pine floorboards, uneven joists, decorative tile hallways at the front door. We work around all of it.
Original pine boards over joists — same story as neighbouring Sidcup, so ply overlay before LVT is the norm.
Before we quote a lvt job in New Eltham
- New Eltham subfloor reality
Original pine boards over joists — same story as neighbouring Sidcup, so ply overlay before LVT is the norm.
- Pattern direction
Plank run follows the longest sightline; in narrow New Eltham hallways that means front-door to kitchen.
- Door undercut
We trim doors on the day so they swing cleanly over glue-down LVT — no scraping, no callbacks.
- Original floorboards protected, screwed down where squeaky
- 6mm ply overlay before LVT so plank joins don't telegraph
- Stripe runners and brass rods on Victorian stair flights
- Sympathetic transitions where flooring meets tiled hallways
Recap — period property fits across SE9 from £40/m², including full subfloor prep.
"Victorian terrace in Avery Hill — stair runner with brass rods, and the original boards are still there underneath." — New Eltham customer
Postcodes: SE9 · Routes: the A20 · Common build: 1930s bay-fronted semis.
Covering Avery Hill, Southwood, Green Lane.
Victorian Property Flooring jobs we've finished nearby
Victorian Property Flooring in New Eltham — common questions
Ply overlay (6mm marine ply, screwed) hides most subfloor variation. If a joist is failing we'll flag it — we don't hide structural issues under a new floor.
Regularly. Standard is a 27" wool runner with brass rods; we also do fully bound edges if you want a bolder line.
Yes — we cut a bespoke oak or brass threshold to sit flush with the tile edge. It looks intentional, not patched.
No — we screw squeaky boards, we don't remove them. If you ever want to expose them again, everything we lay comes back up without harming the pine.