Screed and prep across SE18
A Plumstead Common extension slab with a 15mm fall from door to skirting isn't a hard job — one pour of fibre-reinforced screed brings it flat overnight. Standard prep before we fit LVT the next day.
What concrete floor levelling in Plumstead actually involves
A Plumstead Common extension slab with a 15mm fall from door to skirting isn't a hard job — one pour of fibre-reinforced screed brings it flat overnight. Standard prep before we fit LVT the next day.
Original pine boards on the terraces — ply overlay before LVT is standard.
- Latex screed for 3–15mm level changes
- Fibre-reinforced screeds for cracked slabs
- Full moisture testing before pour
- Ready for LVT, laminate, vinyl or wood
What we check first on a Plumstead subfloor prep job
- Stair nosings
Older Plumstead stairs often have shallow treads — we re-cut grippers rather than force a standard kit.
- Doorway transitions
Most victorian and edwardian terraces doorways here need a bevelled bar rather than a Z-bar to clear the carpet next door.
- Underlay choice
8mm crumb is the usual call for Plumstead bedrooms; 10mm PU on stairs to stop bounce.
“JT Flooring — Excellent from start to finish! Installed my carpets at my old flat and now at my new property. I have recommended to my neighbours and friends who have used his service! Fast, efficient and always gives a friendly personal service!” — Eric Ng, verified Google review
In short — concrete floor levelling in Plumstead from £18/m², latex screed to 3mm/m² tolerance.
Postcodes: SE18 · Routes: the A206 · Common build: Victorian and Edwardian terraces.
Covering Plumstead Common, The Slade, Winn's Common.
Relevant finishes for concrete floor levelling
Concrete Floor Levelling in Plumstead — common questions
Yes — a lot of our screeding is for other fitters and small builders across Plumstead. We hand back a level, dry slab and step out.
Yes — every SE18 slab gets a hygrometer test before we screed. If moisture is above 75% RH we recommend a DPM before any decorative floor goes down.
Latex screed is walk-on in 3–4 hours, floor-fit ready in 24 hours. Standard timing on every Plumstead Common prep-and-fit we do.
3–15mm typical. Above 15mm we specify fibre-reinforced or a specialist deep-pour screed. Most Plumstead residential slabs are inside the standard range.