Latex screed · Self-levelling · Prep-only

Screed and prep across SE28

From £18/m² prep supplied & fitted

Prep-only levelling for other fitters and builders across SE28 — we screed, moisture-test and hand back a level, dry slab ready for whatever floor they're laying.

5-star rated locally·25 minutes from our base·From £18/m² prep supplied & fitted
Thamesmead subfloor prep — 1970s peabody estates
Concrete Floor Levelling · Thamesmead

What concrete floor levelling in Thamesmead actually involves

Prep-only levelling for other fitters and builders across SE28 — we screed, moisture-test and hand back a level, dry slab ready for whatever floor they're laying.

Original 70s screed is often uneven — self-levelling latex is almost always needed for LVT.

What we check first on a Thamesmead subfloor prep job

  • Stair nosings

    Older Thamesmead stairs often have shallow treads — we re-cut grippers rather than force a standard kit.

  • Doorway transitions

    Most 1970s peabody estates doorways here need a bevelled bar rather than a Z-bar to clear the carpet next door.

  • Underlay choice

    8mm crumb is the usual call for Thamesmead bedrooms; 10mm PU on stairs to stop bounce.

Included with every Thamesmead job
  • Latex screed for 3–15mm level changes
  • Fibre-reinforced screeds for cracked slabs
  • Full moisture testing before pour
  • Ready for LVT, laminate, vinyl or wood
Summary

In short — concrete floor levelling in Thamesmead from £18/m², latex screed to 3mm/m² tolerance.

Verified customer review

“Jordan is polite and amiable. He gets on with his work without a fuss — truly professional approach from start to finish. Shall definitely use again in the future.” — Kell Ward, verified Google review

Thamesmead context

Postcodes: SE28 · Routes: the A2016 (Bronze Age Way) · Common build: 1970s Peabody estates.

Covering Southmere, West Thamesmead, Binsey Walk.

JT Flooring gallery

Relevant finishes for concrete floor levelling

Self-levelling screed laid before LVT install from the JT Flooring project gallery
Self-levelling screed laid before LVT install — example from the JT Flooring project gallery for Thamesmead customers
Hallway underlay being laid pre-carpet from the JT Flooring project gallery
Hallway underlay being laid pre-carpet — example from the JT Flooring project gallery for Thamesmead customers
Grey twist-pile carpet across a large open-plan room from the JT Flooring project gallery
Grey twist-pile carpet across a large open-plan room — example from the JT Flooring project gallery for Thamesmead customers
Thamesmead FAQs

Concrete Floor Levelling in Thamesmead — common questions

How thick can latex screed go?

3–15mm typical. Above 15mm we specify fibre-reinforced or a specialist deep-pour screed. Most Thamesmead residential slabs are inside the standard range.

How long before we can fit the decorative floor?

Latex screed is walk-on in 3–4 hours, floor-fit ready in 24 hours. Standard timing on every Southmere prep-and-fit we do.

Do you moisture-test the slab first?

Yes — every SE28 slab gets a hygrometer test before we screed. If moisture is above 75% RH we recommend a DPM before any decorative floor goes down.

Prep only, no decorative floor?

Yes — a lot of our screeding is for other fitters and small builders across Thamesmead. We hand back a level, dry slab and step out.

Call WhatsApp Quote